Rotalock adapter

In valves:- Rotalock adapter type- the body and flare are made off low carbon steel and the needle is made of steel.- Flat leg type- the body and flare are made off low carbon steel, connection tubes to brazing are made off copper tubes and the needle is made of steel. The Rotalock adapter valve's surface is protected from corrosion by tin plating. There are different kinds of flare in the valves:- inlet flare,- outlet flare,- auxiliary flare used to connection to the installations.- with the hole φ1,15 mm to connect the pressure control.- with the hole φ4 mm to connect the manometer. The valves set in the table are in production process.

The function of an Oil Reservoir is to provide a holding charge of oil, as part of a Low Pressure Oil Management System. The quantity of oil circulating in a system changes depending on the operating conditions. The oil reservoir simply caters for all these fluctuations by providing extra storage capacity.

Know More About Rotalock Adapter and its Applications

Rotalock adapter valves are supplied with each reservoir to facilitate easy oil fill and drain. A connection is provided at the top of the unit for fitting a pressure vent valve. Models are usually provided with two or three sight glasses for clear visual warning of filled oil level. The standard range of reservoirs is suitable for HCFC and HFC refrigerants, along with their associated oils

Flow Controls and Rotalock Adapter

Flow Controls are required in the HVAC/R system to protect and control against any discrepancies, damage or failure. System protectors increase the reliability of the refrigeration system by capturing and controlling contaminants such as moisture, acid, debris, resin, and wax. Rotalock adapter provide precise control of the refrigerant flow to maximize system performance or the ability stop flow completely when required. Oil management is critical to ensuring the reliable operation of the equipment while simultaneously maintaining high system performance. Temperature pressure controls is available to protect the system from damage during nonstandard operating conditions and provide control during compressor cycling, pump-down and defrost conditions.

We are manufacturing only high quality valve including Rotalock adapter. Using our product the shelf life of the equipment is enhanced. For more details visit us at www.goldair-control.com.